Witaj, Gość
Główna » Artykuły » Moje artykuły

WEATHERING AND THE FORMATION OF SOIL

 WEATHERING AND THE FORMATION OF SOIL

Weathering is a key part of the process of soil formation, and soil is critical to our existence on Earth. Many people refer to any loose material on Earth’s surface as soil, but to geologists (and geology students) soil is the material that includes organic matter, lies within the top few tens of centimeters of the surface, and is vital in sustaining plant growth.

Soil is a complex mixture of minerals (approximately 45 percent), organic matter (approximately 5 percent), and empty space (approximately 50 percent, filled to varying degrees with air and water). The mineral content of soils is variable, but is dominated by clay minerals and quartz, along with minor amounts of feldspar and small fragments of rock. The types of weathering that take place within a region have a significant influence on soil composition and texture. For example, in a warm climate, where chemical weathering dominates, soils tend to be more abundant in clay. Soil scientists describe soil texture in terms of the relative proportions of sand, silt, and clay. The sand and silt components in this diagram are dominated by quartz, with lesser amounts of feldspar and rock fragments, while the clay component is dominated by the clay minerals.

A natural compound called tunicamycin, which is found in certain soil types, could bolster penicillin’s effectiveness against antibiotic-resistant germs. Image by the U.S. Department of Agriculture.

Soil forms through accumulation and decay of organic matter and the mechanical and chemical weathering processes described above. The factors that affect the nature of soil and the rate of its formation include climate (especially average temperature and precipitation amounts, and the following types of vegetation), the type of parent material, the slope of the surface, and the amount of time available.

CLIMATE

Soils develop because of the weathering of materials on Earth’s surface, including the mechanical breakup of rocks, and the chemical weathering of minerals. The downward percolation of water facilitates soil development. Soil forms most readily under temperate to tropical conditions (not cold) and where precipitation amounts are moderate (not dry, but not too wet). Chemical weathering reactions (especially the formation of clay minerals) and biochemical reactions proceed fastest under warm conditions, and plant growth is enhanced in warm climates. Too much water (e.g., in rainforests) can lead to the leaching of critical chemical nutrients and hence to acidic soils. In humid and poorly drained regions, swampy conditions may prevail, producing soil that is dominated by organic matter. Too little water (e.g., in deserts and semi-deserts), results in minimal downward chemical transportation and the accumulation of salts and carbonate minerals (e.g., calcite) from upward-moving water. Soils in dry regions also suffer from a lack of organic material.

image
U.S. Department of Agriculture soil texture diagram.

PARENT MATERIAL

Soil parent materials can include all different types of bedrock and any unconsolidated sediments, such as glacial deposits and stream deposits. Soils are described as residual soils if they develop on bedrock, and transported soils if they develop on transported material such as glacial sediments. However, the term “transported soil” is misleading because it implies that the soil itself has been transported, which is not the case. When referring to such soil, it is better to be specific and say “soil developed on unconsolidated material,” because that distinguishes it from soil developed on bedrock.

Quartz-rich parent material, such as granite, sandstone, or loose sand, leads to the development of sandy soils. Quartz-poor material, such as shale or basalt, generates soils with little sand.

Parent materials provide essential nutrients to residual soils. For example, a minor constituent of granitic rocks is the calcium-phosphate mineral apatite, which is a source of the important soil nutrient phosphorus. Basaltic parent material tends to generate very fertile soils because it also provides phosphorus, along with significant amounts of iron, magnesium, and calcium.

Some unconsolidated materials, such as river-flood deposits, make for especially good soils because they tend to be rich in clay minerals. Clay minerals have large surface areas with negative charges that are attractive to positively charged elements like calcium, magnesium, iron, and potassium, which are essential nutrients for plant growth.

SLOPE

Soil can only develop where surface materials remain in place and are not frequently moved away by mass wasting. Soils cannot develop where the rate of soil formation is less than the rate of erosion, so steep slopes tend to have little or no soil.

TIME

Even under ideal conditions, soil takes thousands of years to develop. Virtually all of northern North America was still glaciated up until 14 ka. Glaciers still dominated the central and northern parts of Canada until around 10 ka, and so, at that time, conditions were still not ideal for soil development even in the southern regions. Therefore, soils in Canada, and especially in central and northern Cana

da, are relatively young and not well developed.

The same applies to soils that are forming on newly created surfaces, such as recent deltas or sandbars, or in areas of mass wasting.

SOIL HORIZONS

The process of soil formation generally involves the downward movement of clay, water, and dissolved ions, and a common result of that is the development of chemically and texturally different layers known as soil horizons. The typically developed soil horizons are:

  • O — the layer of organic matter
  • A — the layer of partially decayed organic matter mixed with mineral material
  • E— the eluviated (leached) layer from which some of the clay and iron have been removed to create a pale layer that may be sandier than the other layers
  • B — the layer of accumulation of clay, iron, and other elements from the overlying soil
  • C — the layer of incomplete weathering

 

Graphic of a soil profile showing O, A, B, and C horizons. The depth numbers are approximately. O ( 0″ – 2″ ): Organic A ( 2″ – 10″ ): Surface B ( 10″ – 30″ ): Subsoil C ( 30″ – 48″ ): Substratum R ( not shown on graphic ): Parent material, e.g. bedrock. Image source: U.S. Department of Agriculture.

Another type of layer that develops in hot, arid regions is known as caliche (pronounced ca-lee-chee). It forms from the downward (or in some cases upward) movement of calcium ions, and the precipitation of calcite within the soil. When well developed, caliche cements the surrounding material together to form a layer that has the consistency of concrete.

Like all geological materials, soil is subject to erosion, although, under natural conditions on gentle slopes, the rate of soil formation either balances or exceeds the rate of erosion. Human practices related to forestry and agriculture have significantly upset this balance.

image
Soil profile of a small cliff.

Soils are held in place by vegetation. When vegetation is removed, either through cutting trees or routinely harvesting crops and tilling the soil, that protection is either temporarily or permanently lost. The primary agents of the erosion of unprotected soil are water and wind.

Soil is an important reservoir for organic components necessary for plants, animals, and microorganisms to live. The organic component of soil, called humus, is a rich source of bioavailable nitrogen. Nitrogen is the most common element in the atmosphere, but it exists in a form most life forms are unable to use. Special bacteria found only in soil provide most nitrogen compounds that are usable, bioavailable, by life forms.

Nitrogen cycle. Image source: U.S. Environmental Protection Agency.

These nitrogen-fixing bacteria absorb nitrogen from the atmosphere and convert it into nitrogen compounds. These compounds are absorbed by plants and used to make DNA, amino acids, and enzymes. Animals obtain bioavailable nitrogen by eating plants, and this is the source of most of the nitrogen used by life. That nitrogen is an essential component of proteins and DNA. Soils range from poor to rich, depending on the amount of humus they contain. Soil productivity is determined by water and nutrient content. Freshly created volcanic soils, called andisols, and clay-rich soils that hold nutrients and water are examples of productive soils.

Water erosion is accentuated on sloped surfaces because fast-flowing water has greater eroding power than still water. Raindrops can disaggregate exposed soil particles, putting the finer material (e.g., clays) into suspension in the water. Sheetwash, unchannelled flow across a surface carries suspended material away, and channels erode right through the soil layer, removing both fine and coarse material.

Wind erosion is exacerbated by the removal of trees that act as windbreaks and by agricultural practices that leave bare soil exposed.

Tillage is also a factor in soil erosion, especially on slopes, because each time the soil is lifted by a cultivator, it is moved a few centimeters down the slope.

LICENSE

 

Icon for the Creative Commons Attribution 4.0 International License

Introduction to Physical Geography by R. Adam Dastrup is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Kategoria: Moje artykuły | Dodał: kolo (2019-04-08)
Wyświetleń: 29 | Rating: 0.0/0
Liczba wszystkich komentarzy: 0
Imię *:
Email *:
Kod *:
Kategorie sekcji
Mini-czat
Statystyki

Ogółem online: 1
Gości: 1
Użytkowników: 0
Formularz logowania
 Statystyki